1-Port UHF RFID Reader Module
RLM-1P 1-Port UHF RFID Reader Module
Embed one controlled UHF RFID read point inside your smart cabinet, compact terminal, or OEM embedded device.
Built for device teams that need to add one controlled UHF RFID read point into a compact enclosure before moving to pilot integration.
Why Use RLM-1P?
Why use RLM-1P for embedded RFID devices?
RLM-1P is designed for equipment that needs one controlled UHF RFID read point inside the device, rather than a separate external reader.
Control one RFID read point
Use one RF antenna port for smart cabinets, compact terminals, verification stations, and predictable item interaction points.
Simplify embedded integration
TTL host interface, 12-pin FPC connector, MMCX antenna connector, and compact dimensions support embedded device design.
Tune the read zone
Adjustable RF output and RSSI information help engineering teams validate antenna placement and read-zone behavior.
Support device development
SDK package, product datasheet, TTL communication notes, interface guidance, and antenna review are available by request.
Features
RLM-1P features for compact embedded RFID integration
1 RF antenna port
Designed for applications where one antenna position is enough to cover the required read zone.
TTL host interface
Supports embedded host controller communication through a TTL interface.
12-pin FPC connector
Provides compact host-side connection for device and cabinet integration.
MMCX antenna connector
Connects one external RFID antenna through a compact RF connector.
Adjustable RF output
RF output can be adjusted up to 33 dBm with 1 dB stepping.
Tag filtering and RSSI support
Tag data filtering and RSSI information support host-side RFID data processing.
Applications
Bring embedded RFID to smart cabinets, OEM devices, and verification stations
RLM-1P is best suited for compact devices with one defined RFID read zone and predictable item interaction.
Smart Cabinet Read Zone
Smart Cabinets & Tool Cabinets
One controlled RFID read point for item presence detection, access verification, consumable tracking, and small-zone inventory.
Best when one antenna position is enough
OEM Embedded RFID
OEM Embedded Devices
Add UHF RFID read/write capability into custom equipment using TTL host communication and one external RFID antenna.
Compact integration for custom equipment
Single-Point Verification
Single-Point Verification
Fixed-position RFID reading for inspection, production verification, kiosk workflows, and controlled access devices.
Controlled read zone at one locationDesign-in Guidance
RLM-1P design-in workflow
Use this compact workflow to plan antenna position, host connection, tag behavior, and pilot validation before final device integration.
Confirm where the tagged item should be detected.
Check antenna position, cable path, and enclosure space.
Prepare TTL host connection and power input.
Use tag filtering, RSSI, and event logic in software.
Test read reliability before production deployment.
Specifications
RLM-1P UHF RFID reader module specifications
Review physical interface, RF protocol, frequency options, RF performance, data features, and environmental specifications before pilot integration.
| Physical & Interface | Product Model | RLM-1P |
|---|---|---|
| Product Type | 1-port UHF RFID reader module | |
| Dimensions | 56.0 mm × 35.6 mm × 6.0 mm | |
| Host Connector | 12-pin FPC | |
| RF Performance | Antenna Port | 1 RF port |
| RF Connector | MMCX | |
| RF Output | Up to 33 dBm | |
| Read Speed | >500 times/sec | |
| Data & Features | Supported Data Functions | Tag data filter, RSSI |
| Additional Functions | DRM, simultaneous identification | |
| Notes | Confirm final feature support from the latest product information before design-in | |
| Environmental Specs | Operating Temperature | -20°C to +70°C |
| Storage Temperature | -40°C to +85°C | |
| Humidity | 10–95% RH, non-condensing |
Support and Documentation
Product Datasheet
Review dimensions, interface details, RF output, protocol, frequency, and environmental information.
Request datasheet →SDK Package
Request project-matched SDK resources for module evaluation and application development.
Request SDK →TTL Communication Notes
Get host-side communication notes for TTL interface integration through the 12-pin FPC connector.
Ask for notes →
Integration FAQ
Short answers about RLM-1P integration
Can RLM-1P be used inside a smart cabinet?
Yes. RLM-1P is suitable when one controlled antenna point is enough for item identification, presence detection, access verification, or small-zone inventory confirmation.
How do I know if one antenna port is enough?
One port is usually enough when the device has one clearly defined read area. If the project needs multiple shelves or independent zones, review multi-port modules.
What is a UHF RFID reader module used for?
A UHF RFID reader module adds RFID read/write capability into equipment, cabinets, terminals, and custom devices.
What host interface does RLM-1P use?
RLM-1P uses a TTL host interface through a 12-pin FPC connector.
What antenna connector does RLM-1P use?
RLM-1P uses an MMCX antenna connector for the RF port.
Can Raylink help review antenna placement?
Yes. Antenna placement is important for embedded RFID performance, especially inside cabinets, terminals, and compact equipment.
Integration Review
Validate RLM-1P before device design-in
Share your cabinet structure, antenna position, tagged item, TTL host connection plan, expected read distance, operating region, and SDK needs.